Most people think that it’s easy to upgrade a car’s audio system. Many believe that all it takes to make the car’s audio system sound better than stock is to upgrade the factory speakers, and that’s the end of that. But that’s not entirely. Although it helps to have good speakers, investing in a good aftermarket amplifier can make even more of a difference.
Just ask anyone who’s installed competition-grade car amplifiers before, and they’ll tell you just how the right car amplifier can take your car’s audio system to the next level.
With that said, we’ve decided to up the ante in our roundup.
Instead of just recommending the best car amplifiers for 2020, we went and rounded up the best competition grade car amplifiers for 2020.
The “competition-grade” distinction is important. This is because these are not just your typical run-of-the-mill car amplifiers. They’re meant for sound-offs and other competitions. They’re meant for the best of the best, or so to speak.
Top 5 Best Competition Grade Car Amplifier
Built to perform at a reasonable price, the Skar Audio RP-1500.1D is no slouch.
One could argue that the Skar Audio is the best competition grade car amplifier for 2020. Why? For starters, the intricate aluminum design belies the power of the unit hidden underneath. The class D circuitry is well received. Not to mention, it also has a soft start turn on.
Power handling is also a synch with the Skar Audio RP-1500.1D.
On 4 Ohms, it has a power rating of RMS 550 watts x 1 channel, and RMS 930 watts x 1 channel on 2 Ohm, as well as RMS 1500 watts x 1 channel on 1 Ohm.
At its peak, the Skar Audio RP-1500.1D has a rating of 1900 watt, which is just absurd.
What makes this competition grade car amplifier even better is how compatible it is to a number of audio and electrical systems. Although installation can be quite a pain because of how close the connectors are to each other, it comes with dual speaker terminals for easy hooking and connection to two or more speakers. Because of this particular design, you can hook up multiple SK amplifiers together to power just one source.
The internal variable subsonic filter and variable low pass filter, as well as the wired bass remote control, gives this competition grade car amplifier excellent sound quality and arguably even better control.
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,900 Watts | RMS Power at 1 Ohm: 1,500 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
- Stable at 1 ohm | Remote Subwoofer Level Control Included
The Rockford Fosgate line of products is one of the go-to choices for people looking for car amplifiers.
The “Prime” is meant to cater to the entry-level market. Meanwhile, the “Power” line is for high-end amplifiers.
The “Punch” is smacked right in the middle of both as value products that mix high-end features with an affordable price point.
The Punch P1000X1BD is no exception.
Easily one of the best competition grade car amplifiers on the market, the Punch P1000X1BD is a standout even among Rockford Fosgate’s line of products.
It uses an efficient class-BD circuit topology and is capable of producing up to 1000 watts RMS at 1 ohm. It also comes with a low-pass filter and a subsonic filter with variable PEQ2 bass boost.
Other noteworthy features include Rockford Fosgate’s very own CLEAN technology (Calibrated Level Eliminates Audible Noise), Dynamic Thermal Management system, as well as MEHSA MOSFET cooling system.
- The Punch P1000X1bd is a full chassis (2.38” x 7.76” x 13.28”) mono amplifier optimized for subwoofers only, that pumps out a whopping 1,000 Watts into a 1-Ohm load
- Class-BD technology produces bass more efficiently over traditional amps (RMS Power Output: 300 Watts x 1 @ 4-Ohm OR 500 Watts x 1 @ 2-Ohm OR 1000 Watts x 1 @ 1-Ohm)
- RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
- Featuring RCA pass-thru outputs, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
If you’re looking for a competition grade car amplifier that will power your equally powerful sound system and make it produce excellent bass, the Hifonics BRX1516.1D is a 1,500-watt monoblock amplifier that’s well worth a look.
The BRX1516.1D can function across other impedance levels outside of the 1500 watts at 1 Ohms.
You can run it at 2 Ohms with 900 watts per channel and at 4 Ohms at 550 watts per channel.
It can also deliver a frequency response between 10Hz and 250Hz and comes with a variable low pass filter (35Hz to 250Hz), as well as a variable subsonic filtering range (15Hz to 35Hz) and a bass boost of 0-10Db at 45Hz.
Other noteworthy features include a D-Class circuitry and a Modulated MOSFETS technology circuit.
Also, speaking of the circuitry, it comes with a 3-way protection system. This helps minimize the risks of overheating, overloading, and short circuits.
- Ultra-fine mosfets circuit maximizing power efficiency while improving sound quality
- LED power (Green) and protect (Red) indicators
- Manufactured in China
- Frequency Response: 10Hz-250Hz
Packing a whole lot of power at a relatively small size, the Sundown SCV-7500D is one of the best competition grade car amplifiers out there.
The only problem? It’s expensive.
But if you’re willing to pay the high price of entry, the SCV-7500D will not disappoint.
It’s fully capable of running 12-volt electrical systems and will no doubt serve any and all of your needs, regardless of how extreme they are.
You can also daisy-chain this unit to others using the RCA output ports in case the need arises.
Finally, the SCV-7500D is backed by a two-year warranty that pretty much guarantees that it’s going to deliver on its initial promises – and then some.
A relatively affordable option for those who want an upgradable and low-profile competition grade car amplifier, the Alpine PDXM12 packs well above its literal and figurative weight.
It comes with a birth sheet and functional competition, and is capable of reproducing excellent bass.
Also, despite its small size, it comes with Thermal Protection Circuitry technology that minimizes any damage, if at all, to the internal components.
The PDXM12 is also equipped with a subsonic filter for clear sound quality at any frequency with an exhilarating impedance that will blow you away so long as it’s properly assembled.
Competition Car Amps vs Standard Car Amps
Competition car amplifiers and standard car amplifiers work under the same basic principles.
What car amplifiers essentially do is “breathe life” into your music. They help bring out all of the minute and booming details of your car’s audio, giving your car’s audio system setup the excitement and detail that it truly deserves and needs.
But if that’s the case, then exactly is the use of having competition grade car amplifiers?
Well, for starters, the best competition car amplifiers are built to perform. They use high-grade components to deliver the kind of continuous awesome and powerful performance excepted of competition grade car audio systems with little to no strain.
Put simply, if you’re looking to build a competition-grade audio system in your car, you’ll need a competition grade car amplifier.
What You Should Consider Before Buying Competition Car Amplifiers
There are a lot of factors that you should consider first when looking for competition grade car amplifiers.
For starters, if you’re powering dual-sub setups, or you have a big foot-long car subwoofer (or even larger), you’ll want to get a competition grade car amplifier with stable 1-ohm power. Ideally, you’ll want something that you can bridge multiple output ports to for extra power when necessary.
Other factors worth taking note of are internal component shielding, coil and capacity quality, input and output options, heat dissipation, thermal protection, and more.
All of these factors play a huge role in how clean and powerful your car audio system is going to be and how minimal the distortion will be. The internal circuitry, in particular, will play a huge part in the frequency response of the amp. It will affect how well the amp reacts whenever it’s fed with low-frequency sounds.
A lot goes into choosing the best competition grade car amplifiers available today.
Rest assured that we did our research to make sure that we recommended the best competition grade car amplifiers available this 2020.
While we know that competition grade car amplifiers aren’t cheap, they are well worth the money. This is especially true if you plan on joining car shows and competitions. Or, when you just want to enjoy some high-quality music while out on the road and during your daily commute.
With our recommendations, you can rest easy knowing that we chose nothing but the best that your money can buy.
Last update on 2020-05-24 at 13:59 / Affiliate links / Images from Amazon Product Advertising API